Skip to contentMackay All
Cookies help us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more
A jig to rout out apertures, recesses and radii in work tops to fita range of sinks and hobs, and to suit curved cabinets.
Will cut both an internal and external radiius with the use ofeither pins or engraved sight lines.
Will cut a 90 degree angle, which when combined with the straightslot will allow a hob or sink aperture to be routed. Central slotallows cuts up to 820mm long.
Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm and 250mm, and hasexternal radii of 50mm, 100mm and 200mm
Jig has a 45 degree end cut , plus 26mm and 35mm cabinet door hingerecess facility.
Engraved lines to position jig to marked position on theworktop.
Each set of external radius curves is paired with a set of pegholes that will set the jig to work top edge.
Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity andminimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2inch) cut lengt
Corner angle=90 degree
Slot length=830 mm
Radius curves=40, 60, 80, 100, 150 & 250 mm
External radius=50, 100 & 200 mm
End cut=45 degrees
Kitchen hinge recess=26 mm & 35 mm
Length=1000 mm
Thickness=12 mm
Width=390 mm
Weight=4.6 kg
DescriptionCodePrice INC VATBasket
Trend Ar/jig Aperture Radius JigAR/JIG£123.60
Trend Ar/jig Aperture Radius Jig