Skip to contentMackay All
Cookieshelp us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more
GEDORE 1.06/HSP2 Hydraulic pressure spindle 12 t

· For controlled and safe pulling work
· Set up for a pressure of 10 t, 12 t or 15 t Preparationfor use: 1. Before using, check whether the pressure spindle isscrewed far enough out of the cap, so that the pressure pad is inthe initial position in the hydraulic cylinder. 2. Unscrew the capfrom the spindle body. For this purpose, first slacken off the grubscrew. 3. Screw the spindle body from beneath into the cross pieceof the puller until the body protrudes approx. 60 mm from the crosspiece. 4. Screw the cap onto the spindle body until the stop, andthen fix it in position by turning in the grub screw. Use andoperation: e.g. HSP3 5. Place the puller into position andpre-tension the spindle body using a size 41 mm wrench. 6. Screwthe pressure spindle size 17 mm into the cap. The hydraulic effectwill come into use. The stroke of the pressure pad in the hydrauliccylinder is max. 12 mm. The workpiece that has been loosened by thehydraulic force may be pulled off completely by turning the spindlebody with the cap size 41 mm. 7. Following its use, the pressurespindle (size 17 mm) is turned back into its initial position andthe pressure pad pushed into the hydraulic cylinder.
  • Spindle size (Thread x Length): 3/4"
  • Height of head (a, a1, b, h, L2, t): 80 mm
  • Usable spindle length: 205 mm
  • Length: 420 mm
  • Width Across Flat / Actuating Hexagon: 12 mm
  • Width Across Flat (mm) 2: 36 mm
  • Stroke: 12 mm
  • Pressure t: 12 t
  • Pressure N.m: 19 Nm
  • Power of pressure kN: 120 kN
  • Weight: 1,8 kg
  • Target group: Industry
Not available in store
DescriptionCodePriceINC VATBasket
Gedore 1.06/hsp2 Hydraulic Pressure Spindle 12 T8116290£278.49 Save 47%
GEDORE 1.06/hsp2 Hydraulic Pressure Spindle 12 T