Skip to contentMackay All
Cookieshelp us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more
PCD sawblade for use in 160mm plunge saws for rough cuttingGemstone worktop, wood-based material, plastic, cement fibre board,tool-wearing material eg laminate and solid wood.
For use on professional portable circular saws.
Eight tooth high-quality industrial polycrystalline diamond cuttingtips.
10 degree top angle with negative 5 degree hook.
For roughing cut leaving 5mm overhang for router trimming.
Gemstone worktop is made of 85% recycled material including glassand shell, the solid upper surface is extremely abrasive andrequires diamond tools to cut it. Gemstone worktop has 6mm solidmaterial bonded to a 28mm high performance chipboard core.
For 5mm overhand rough cut set circular saw for first depth of cut3-4mm plunged in to the edge of the front side of the worktop,second cut at 10mm depth, and 40mm for final cut.
Final trimming of 5mm overhang should be made with a router, usingof a PCD router cutter ref. PCD/GEM01X1/2.
Not for non-ferrous material, glass or stone.
D=6 1/4 inches
D=160 mm
Bore=20 mm
Kerf=2.4 mm
Plate thick=1.6 mm
No. of Teeth=8
Tooth form=Flat
Hook=-5 degrees
Quick Selector No.=7.1
Type=Gemstone
Cut Finish=Roughing
Suitable for
Festool TS55
Note: Blade should not project more than 1mm out of bottom
Stockcode30310406
Barcode5027654056387
Weight0.296kg
Available3
Not available in store
DescriptionCodePriceINC VATBasket
Trend Pcd/sb/1608 Pcd Saw Blade 160mm X 8t X 20mm X 2.4mmPCD/SB/1608£142.80
Trend Pcd/sb/1608 Pcd Saw Blade 160mm X 8t X 20mm X 2.4mm