Trend 2/01 X 1/4 Tungsten Carbide One Flute Cutter
The depth of cut on cutters of 2.0 mm diameter and below shouldbe a maximum of 1.0 mm per pass.
Small diameters in Tungsten Carbide must be handled with care toavoid breakage and very shallow passes must be made. Use TungstenCarbide tooling when working with abrasive materials such aschipboard, MDF, plywood & certain hardwoods
Single flute cutters must not be used in eccentric chucks.
Tooling: Tungsten Carbide
Diameter D 1.5 mm.
Depth C 6 mm.
|Not available in store|
If you require further information about "Trend 2/01 X 1/4 Tungsten Carbide One Flute Cutter" please contact us.