Skip to contentMackay All
Cookies help us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more
Panel raiser cutters for producing the panel for cabinet panelleddoors.
The tool is fitted with a back cutter to ensure a maximum paneltongue thickness of 6.3mm.
Must be used in a stationary variable speed router either mountedoverhead or inverted in a router table at a reduced speed. For useon natural timber and MDF.
Take several passes by adjusting back fence position with eachpass.
Stationary use only.
Back cutter must be fitted at 90 degrees to main tool to reduce thecutting impact.
D=88.9 mm
d=54 mm
C=5/8 inch
C=16 mm
B=16 mm
A=15 degrees
Tongue=6.3 mm
Reveal=36.5 mm
OL=77.5 mm
Shank Diameter=1/2 inch

Timber thickness min.=16 mm*
Timber thickness max.=25.4 mm
*(back of panel will not need back cutting)
Not available in store
DescriptionCodePrice INC VATBasket
Trend C170ax1/2tc Guided Bevel Raiser & Back Cut 15 DegreeC170AX1/2TC£90.52 Save 31%
Trend C170ax1/2tc Guided Bevel Raiser & Back Cut 15 Degree