Trend It/cds/set071 Style G Bevel 4mm Groove 30mm Bore

Cabinet Door System tools for manufacturing solid timber andcabinet doors quickly and accurately on a spindle moulder with aflush mounted sliding table.
Manufacture any size of cabinet door or internal door.
Set the machine in seconds with the supplied setting gauge and donot alter it to produce all the profiles and scribes.
All tools and spacers are numbered for easy set-up.
Four different panel door thicknesses can be accommodated, 4mm,5mm, 6mm and 9mm.
Door thicknesses from 18mm to 35mm can be produced.
Requires a 2.2KW (3.0HP) spindle moulder, with 140mm clear verticalaccess (to use CDS), 220mm inside the hood (for 200mm panel raisingtool) and 100mm shaft height.
Please see specifications below for spindle moulderrequirements.
Bore=30 mm
Thickness min=18 mm
Panel groove thickness=4 mm
Radius=2 mm
Spindle moulder minimum specification
Sliding table=flush mounted
Usable spindle shaft height min.=100 mm
Recommended power=2.5KW (3HP)
Spindle speed=3,500 to 9,000 rpm
Table aperture=