Skip to contentMackay All
Cookieshelp us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more
Hard wearing solid laminate 12mm thick jig that cuts both parts ofthe joint in 15 minutes including setting up.
Left hand and right hand corners, 400mm radius peninsular joint, 45degree end cut with slight radius, 45 degree trade corner solutionfor hob units, 100mm radius corner, 40mm radius corner, 35mmkitchen door hole and 3/4inch BSP hole for mixer taps.
Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm,650mm and 700mm wide worktops.
Cuts up to 40mm thick worktops with or without anti-drip postformededge.
Three open-ended bolt recesses (dog bone style) for 150mmbolts.
Engraved lines for short 65mm bolts and worktop cross-cut.
10mm diameter plastic pins with tapered shoulder for tight fitprovides three point pin contact to ensure ease of setting up.
Engraved markings for identification of pin holes.
Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity andminimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2inch) cut length.
Two clamps.
Stockcode94807025
Barcode5027654559710
Weight5.800kg
Available1
DescriptionCodePriceINC VATBasket
Trend Kwj/700 Kitchen Worktop JigKWJ/700£114.44
Trend KWJ/700 Kitchen Worktop Jig