Trend S49/30x1/4stc Roughing 6.3x25mm Phenolic Downcut
Solid carbide spiral roughing tool to rout a composite materialsincluding phenolics, carbon fibre, fibreglass and Trespa.
Unique grinding and multi-flute design.
Suitable for roughing cuts in hard and abrasive material. Roughingcuts are for bulk removal and require separate finishing cutter forclean up.
Special grade carbide for maximum durabilty.
Downcut for better clamping when machining small workpieces andimproved finish on the tops of the board.
For use on routers and CNC routers.
Not recommended for plunge cutting unless ramped intoworkpiece.
Please note roughing tools give a rough cut edge and requiresseparate cleaning up.
DIMENSIONS:
D1=1/4 inches
D1=6.3 mm
Cut length=25 mm
Overall length=62 mm
Shank Diameter=1/4
Unique grinding and multi-flute design.
Suitable for roughing cuts in hard and abrasive material. Roughingcuts are for bulk removal and require separate finishing cutter forclean up.
Special grade carbide for maximum durabilty.
Downcut for better clamping when machining small workpieces andimproved finish on the tops of the board.
For use on routers and CNC routers.
Not recommended for plunge cutting unless ramped intoworkpiece.
Please note roughing tools give a rough cut edge and requiresseparate cleaning up.
DIMENSIONS:
D1=1/4 inches
D1=6.3 mm
Cut length=25 mm
Overall length=62 mm
Shank Diameter=1/4
Stockcode | 30309894 |
---|---|
Barcode | 5027654051245 |
Weight | 0.038kg |
Available | 3 |
Not available in store |
Sorry no media available!
If you require further information about"Trend S49/30x1/4stc Roughing 6.3x25mm Phenolic Downcut" please contact us.
If you require further information about"Trend S49/30x1/4stc Roughing 6.3x25mm Phenolic Downcut" please contact us.