Skip to contentMackay All
Cookies help us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more
The Unibase enables routers with non-standard guide bush fittingsto accept the range of Trend guide bushes, Will fit directly tomost routers.

Line-up pin used with a 16mm plastic bush to ensure concentricityof the cutter to the guide bush when fitting the sub-base. Suitscollet sizes 1/4inch, 8mm, 12mm and 1/2inch.
Instructions for fitting
The line-up pin fit into the collet and is plunged through therouter base. The line-up bush is fitted into the Unibase andsecured. This is then placed over the line-up pin and rotated inorder to line up the fixing holes. The Unibase screws are tightenedand then the line-up bush can be replaced with any choice of Trendguide bushes. These range from 10mm up to 30mm (GB10 - GB32). Forlarger diameter cutters a 40mm guide bush (GB40) is available.
DescriptionCodePrice INC VATBasket
Trend Universal Subbase C/w Pins & BushUNIBASE£23.20
Trend Universal Subbase C/w Pins & Bush