Skip to contentMackay All
Cookieshelp us to give you the best experience on our website. By continuing to use our website we'll assume that you agree to our use of cookies. or Learn more

For routing Belfast /Butler sinks.
Made from 12mm hardwearing CNC machined phenolic.
Will also allow drip channel groove to be routed on the undersideof the worktop.
Corner radius of 25mm. Maximum distance 630mm or 1030mm whenoverlapping slots.
For sinks 1050mm wide and 440mm to 515mm deep.
Twin pin location for stable and accurate lining up of jig. Presetholes for 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 480mm and 500mmwidth, a packing piece required for sizes in between.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity andminimum 1300 watts.
A template guide bush with 30mm outside diameter for main recessand 16mm outside diameter for water drip groove.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2inch) cut length for main recess and a radius cytter R2.5mm for thewater drip groove.
Two 100mm (4 inch) throat clamps.
Supplied with clear & comprehensive instructions for use.
Length= 655 mm
Width= 600 mm
Thickness=12 mm
DescriptionCodePriceINC VATBasket
Trend Bs/jig Belfast Sink JigBS/JIG£123.17
Trend Bs/jig Belfast Sink Jig